Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
ATGP-FA — Compatible with the SawStop Professional Cabinet Saw (PCS) and Contractor Saw (CNS).
ATGI-FA — Compatible with the SawStop Industrial Cabinet Saw (ICS).
Features:
Whether you buy the T-Glide Advance with a brand new table saw or simply as an upgrade to your existing saw, you’ll enjoy the many benefits this new fence provides.
NO-HASSLE FIT: The T-Glide Advance fits onto existing SawStop T-Glide fence rails with no conversion or modification needed. It locks parallel to the blade.
HI-LOW ALUMINUM FENCE FACE: The dead-flat aluminum face won’t warp over time. You can use the Hi-Low aluminum fence in three positions. In low position you can set it beneath the blade guard for narrow rip cuts, providing better access for push sticks. And you can also invert the fence in low position, with the gap facing the cast iron top, and use the fence as an “L” fence for flush-trimming and straight-edging stock.
GET IN THE GROOVE: The dovetail-shaped slot along the fence face allows you to easily mount feather boards and other accessories as well as jigs and sacrificial fences.
FRONT-TO-BACK SLIDE: Loosen the mounting bar and easily slide the fence face forward or back when needed. For example, slide the fence toward you to position its end in front of the blade, allowing you to use it as a stop block for safe, repeatable, accurate crosscuts without the risk of offcuts getting pinched between the blade and fence.
DUAL FENCE-SCALE MARKERS: Separate scale indicators for high and low fence positions ensure can’t-miss accuracy.
ROLLING, ROLLING, ROLLING: Twin rollers support the tail end of the tube for a smooth glide across the tabletop, reducing wear marks in the cast iron.
FULLY REVERSIBLE: The aluminum fence can be moved to the right side of the T-Glide tube for use on the left side of the blade.
ATGP-FA — Compatible with the SawStop Professional Cabinet Saw (PCS) and Contractor Saw (CNS).
ATGI-FA — Compatible with the SawStop Industrial Cabinet Saw (ICS).
Features:
Whether you buy the T-Glide Advance with a brand new table saw or simply as an upgrade to your existing saw, you’ll enjoy the many benefits this new fence provides.
NO-HASSLE FIT: The T-Glide Advance fits onto existing SawStop T-Glide fence rails with no conversion or modification needed. It locks parallel to the blade.
HI-LOW ALUMINUM FENCE FACE: The dead-flat aluminum face won’t warp over time. You can use the Hi-Low aluminum fence in three positions. In low position you can set it beneath the blade guard for narrow rip cuts, providing better access for push sticks. And you can also invert the fence in low position, with the gap facing the cast iron top, and use the fence as an “L” fence for flush-trimming and straight-edging stock.
GET IN THE GROOVE: The dovetail-shaped slot along the fence face allows you to easily mount feather boards and other accessories as well as jigs and sacrificial fences.
FRONT-TO-BACK SLIDE: Loosen the mounting bar and easily slide the fence face forward or back when needed. For example, slide the fence toward you to position its end in front of the blade, allowing you to use it as a stop block for safe, repeatable, accurate crosscuts without the risk of offcuts getting pinched between the blade and fence.
DUAL FENCE-SCALE MARKERS: Separate scale indicators for high and low fence positions ensure can’t-miss accuracy.
ROLLING, ROLLING, ROLLING: Twin rollers support the tail end of the tube for a smooth glide across the tabletop, reducing wear marks in the cast iron.
FULLY REVERSIBLE: The aluminum fence can be moved to the right side of the T-Glide tube for use on the left side of the blade.