54HH 6" Jointer with helical cutterhead

Availability: In Stock


Quick Overview

54HH 6" Jointer with helical cutterhead

Please contact us for any questions you may have or to place an order!

Toll Free: 800-442-2302

Phone: 704-523-3187

Fax: 704-523-3189

Email: leneavesupp4416@bellsouth.net


This 6" Jointer features a helical cutterhead with 40 four-sided indexable carbide knife inserts – this design provides a superior finish and quieter operation compared to conventional cutterheads, and the inserts require no adjustment once they are installed. If a knife insert becomes nicked, simply rotate it for a fresh edge and continue working. Oversized infeed/outfeed tables are mounted on dovetailed ways. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a 1 HP motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.

• Helical cutterhead with four-sided knife inserts provides smoother, quieter cutting and finer finish than conventional systems
• 66" long adjustable infeed and outfeed tables provide more working surface
• Fine/quick adjustment lever on infeed table for precision cuts
• Extra-long 38" two-way tilting fence with positive stops provides quick positioning for 90° or bevel cuts
• Enlarged sheet metal stand provides a sturdy base
• 1HP motor offers plenty of power
• Fence controls are center-mounted for convenience
• Push button switch is lockable to prevent accidental starting
• 4" port for dust collection
• Standard Equipment:
• 1HP TEFC Motor
• Two push blocks
• Dust collection port
• Cutterhead guard
• Industrial push-button switch


Number of Knives 40  
Standard Knife Size (L x W x T) (In.) 59/100 x 59/100 x 1/10  
Cutterhead Speed (RPM) 6,000  
Cutting Capacity (W x D) (In.) 6 x 1/2  
Table Size (L x W) (In.) 66 x 7-1/4  
Table Height from Floor (In.) 31-1/2  
Infeed Table Length (In.) 32-1/2  
Outfeed Table Length (In.) 32-1/2  
Fence Size (L x H) (In.) 38 x 4  
Fence Tilt (Deg.) 45 Left, 45 Right  
Fence Positive Stops (Deg.) -45, 45, 90  
Dust Collection Minimum CFM Required (CFM) 800  
Dust Port Outside Diameter (In.) 4  
Motor Power (HP) 1  
Motor Phase 1  
Motor Voltage (V.) 115, 230  
Prewired Voltage (V.) 115  
Motor Current (Amps) 13, 6-1/2